Dismantling of this drive clutch page 03 : 28

03

Machine position 100°

1. Remove  handwheel and guard undo the three screws 8 of motor support 9 lift motor 10 and retighten on screw 8
2. Remove the four V- belts 11
3. On do screws (silver- Gray) 12 and screw's ( black)13 gradually and in a diagonally opposed sequence 
4. Remove clamping disc 14
5. If clamping disc 14 is very tight insert tree escrows 15 with m 10 thread instead of the three  escrows (silver - grey) 12 and turn inwardly to a maximum extent of 3 to 5 turns and remove clamping disc 14
6. Remove grease nipples 16
7. Insert the two across 17 of the ppull- of device 18 in the to treaded holes of the coupling flying 19 
8. Remove coupling flying 19 together with flywheels 21 by turning the escrow 20 inwards