Amar Kumar loom mechanical engineering loom

Machine drive machine brake The following points are of deceive importance for the speed Of the Machine 

03 Machine position 100° Remove  handwheel and guard undo the three screws 8 of motor support 9 lift motor 10 and retighten on screw 8 Remove the four V- belts 11 On do screws (silver- Gray) 12 and screw's ( black)13 gradually and in a diagonally opposed sequence  Remove clamping disc 14 If clamping disc 14 is very tight insert tree escrows 15 with m 10 thread instead of the three  escrows (silver - grey) 12 and turn inwardly to a maximum extent of 3 to 5 turns and remove clamping disc 14 Remove grease nipples 16 Insert the two across 17 of the ppull- of device 18 in the to treaded holes of the coupling flying 19  Remove coupling flying 19 together with flywheels 21 by turning the escrow 20 inwards

Loon mechanical engineer parts Turn out screw 1 limit switch to Replace toller 3 in flowing manner Locate open position of circlip 4 by turning the roller 3 Apply assembly gripper 5 on open position of circlip 4and force circlip off the bolt 6 Remove bolt 6 and roller 3 Clamp disc 7 in assembly gripper 5 and position in in limit switch 2 together with new roller3 Insert bolt 6 observe the position of the groove for the circlip 4 Clamp circlip 4 in assembly gripper 5 and press onto bolt 6 Fit limit switch 2  and  adjust according to adjustment instruc tions be3