Loom mechanical engineer parts

Loon mechanical engineer parts

1. Turn out screw 1 limit switch to
2. Replace toller 3 in flowing manner
3. Locate open position of circlip 4 by turning the roller 3
4. Apply assembly gripper 5 on open position of circlip 4and force circlip off the bolt 6
5. Remove bolt 6 and roller 3
6. Clamp disc 7 in assembly gripper 5 and position in in limit switch 2 together with new roller3
7. Insert bolt 6 observe the position of the groove for the circlip 4
8. Clamp circlip 4 in assembly gripper 5 and press onto bolt 6
9. Fit limit switch 2  and  adjust according to adjustment instruc tions be3
10.